Body Control Module
WARNING: This page is about a different car, the 2011 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
The various body control module (BCM) input and output circuits are described in the corresponding functional areas indicated on the BCM electrical schematics. The BCM functions include the following:
- A/C compressor request-Refer to Content Theft Deterrent (CTD) Description and Operation for the manual system.
- A/C cooling fan-Refer to Air Delivery Description and Operation for the manual system.
- Battery rundown protection (inadvertent power)-Refer to Interior Lighting Systems Description and Operation .
- Bulb check-Refer to Instrument Cluster Description and Operation .
- Chimes-Refer to Indicator/Warning Message Description and Operation
.
- Check gauges
- Door ajar warning
- Headlamps ON
- Key-in-ignition
- Oil reset
- Park brake warning
- Seat belt not fastened
- Turn signal ON
- Door lock interface-Refer to Power Door Locks Description and Operation .
- Electronic power steering (EPS)-Refer to Power Steering System Description and Operation .
- Engine coolant level sensing-Refer to Cooling System Description and Operation .
- Exterior and interior lighting control-Refer to Exterior Lighting Systems Description and Operation
.
- Automatic lighting control
- Daytime running lamps (DRL)
- Fog lamps
- Park brake lights
- Turn hazard lamps
- Gauge control-Refer to Instrument Cluster Description and Operation .
- Horn interface-Refer to Horns System Description and Operation .
- Instrument cluster indicator control-Refer to Instrument Cluster Description and Operation .
- Interior lighting-Refer to Interior Lighting Systems Description and Operation .
- Key-in-ignition sensing-Refer to Indicator/Warning Message Description and Operation .
- Parking brake state sensing-Refer to Brake Warning System Description and Operation .
- Retained accessory power (RAP)-Refer to Retained Accessory Power Description and Operation .
- Rear compartment interface-Refer to Power Door Locks Description and Operation .
- Rear defogger-Refer to Rear Window Defogger Description and Operation .
- Remote function control-Refer to Keyless Entry System Description and Operation (without Accessory 2 Way Remote) , Keyless Entry System Description and Operation (with Accessory 2 Way Remote) .
- Seat belt use sensing-Refer to Seat Belt System Description and Operation .
- Content theft deterrent-Refer to Content Theft Deterrent (CTD) Description and Operation .
- Vehicle theft deterrent-Refer to Content Theft Deterrent (CTD) Description and Operation .
- Washer solvent level sensing-Refer to Wiper/Washer System Description and Operation (Rear) , Wiper/Washer System Description and Operation (Front) .
- Wiper/washer-Refer to Wiper/Washer System Description and Operation (Rear) , Wiper/Washer System Description and Operation (Front) .