LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Wiring Systems And Power Management - Component Connector End Views - MULTIFUNCTION Switch Through Trailer Connector) >> Component Connector End Views >> Seat Lumbar Adjuster Switch - Driver (AG1) Connector End View
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Lumbar Adjuster Switch - Driver (AG1) Connector End View

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Lumbar Adjuster Switch - Driver (AG1) Connector End View
GM62434Courtesy of GENERAL MOTORS CORP.
Seat Lumbar Adjuster Switch - Driver (AG1)

Pin Wire Circuit Function
A 0.35 BK 2050 Ground
B 0.35 PK 1501 Driver Heated Seat High/Low Signal
C 0.35 BN 141 Ignition Voltage
D - - Not Used
E 0.8 BK 2050 Ground
F 0.8 D-BU 611 Driver Seat Lumbar Motor Forward Control
G 0.8 PK 610 Driver Seat Lumbar Motor Rearward Control
H 0.8 OG 1040 Battery Positive Voltage
Connector Part Information 
  • Harness: Driver Power Seat
  • OEM:13652685
  • Service: 12101827
  • Description: 8-Way M Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12047581/2
  • Core/Insulation Crimp: Pins: A-C :E/C, Pins: E-H: E/A
  • Release Tool/Test Probe: J-38125-12A/J-35616-3 (GY)
scientia non olet · About LEMON Manuals