LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Uplander V6-3.9L >> Repair and Diagnosis >> Heating and Air Conditioning >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair >> HVAC - Manual >> HVAC Control Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

HVAC Control Module Replacement



HVAC Control Module Replacement

Removal Procedure




1. Remove the instrument panel (I/P) accessory trim plate.
2. Remove the HVAC control module bolts/screws.
3. Pull the HVAC control module straight out from the I/P.
4. Disconnect the HVAC control module electrical connectors.

Installation Procedure




1. Connect the HVAC control module electrical connectors.
2. Install the HVAC control module into the I/P opening.

Notice: Refer to Fastener Notice (Fastener Notice).

3. Install the HVAC control module bolts/screws.

Tighten the bolts/screws to 2.5 N.m (22 lb in).

4. Install the I/P accessory trim plate.
5. Re-calibrate the actuators. Refer to Actuator Recalibration (Programming and Relearning).
6. Refer to Control Module References (Programming and Relearning) for programming and setup information.

scientia non olet · About LEMON Manuals