October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Slide the fuel level sensor (1) in and down into the module bucket.
Courtesy of GENERAL MOTORS CORP.
- Ensure that the fuel level sensor retaining tabs (3) are fully engaged to the module bucket.
- Wrap the fuel level sensor electrical connector wiring (2) around the fuel pipe.
- Connect the fuel level sensor electrical connector (1) to the module cover.
Courtesy of GENERAL MOTORS CORP.
- Align the pressure sensor (1) to the hole in the bucket.
- Push down and install the sensor to the bucket. Ensure that the sensor is secured to the bucket.
- Install the fuel pump module. Refer to Fuel Pump Module Replacement
.