September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal Procedure
- Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
Courtesy of GENERAL MOTORS CORP.
- Disconnect the mass air flow (MAF) sensor electrical connector.
Courtesy of GENERAL MOTORS CORP.
- Release the clamps (2) on the side of the air cleaner assembly.
- Remove the air cleaner assembly lid (1) by tilting to release the lid from the lower housing.
Courtesy of GENERAL MOTORS CORP.
- Remove the air cleaner element (2) from the lower housing (1).