Wheel Hub: Remove & Replace
WARNING: This page is about the Impala LS, 3.5 K, which is a different variant/trim than selected.
Includes: Replace Inner and/or Outer Bearings, Cups, Seals and repack (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Front,Both | 1.8 | 1.5 | B | |
| Front,One Side | 1.0 | 0.9 | B | |
| Rear,Both | 2.0 | B | ||
| Rear,One Side | 1.1 | 0.9 | B | |
| Combination Procedure: DISC ROTOR: Correct: | ||||
| Lateral Runout,Each | Correct Rotor lateral runout by indexing or correction plate. | 0.2 | B | |
| Combination Procedure: HUB & ROTOR DISC: Clean & Inspect: | ||||
| Corrosion,Each | Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor. | 0.2 | B | |