LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Malibu LS, 3.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.5L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Fuel Tank Module Assembly Components
    GM1796305Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank module assembly. Refer to Fuel Tank Module Replacement .
  2. Remove the fuel level sensor wiring harness from the clip (2) on the module.
  3. Disconnect the fuel level sensor electrical connector from the pump module electrical connector.
  4. Push the tab (1) on the sensor in towards the sensor and remove the level sensor from the module alignment feature (3).
scientia non olet · About LEMON Manuals