Circuit/System Testing
WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the headlamp switch.
- Ignition ON, test for 11.8-12.2 V between the 12 V reference circuit terminal 15 and ground.
- If greater than the specified range, test the 12 V reference circuit for short to voltage. If the circuit tests normal, replace the BCM.
- If less than the specified range, test the 12 V reference circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
- If all circuits test normal, replace the headlamp switch.