September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Component Testing
- Disconnect the harness connector at the right steering wheel control switch.
- Connect a DMM between terminals 2 and 4 of the right steering wheel control switch.
- If any of the resistance measurements for the individual switches are not within the specified resistance values, replace the right steering wheel control switch.
| Function Switch |
Minimum Resistance Value |
Maximum Resistance Value |
| Volume Up |
1.1k Ohms |
1.5k Ohms |
| Volume Down |
1.4k Ohms |
1.8k Ohms |
| Source |
1.7k Ohms |
2.1k Ohms |
| Mute/Voice Activation |
2.2k Ohms |
2.6k Ohms |
| No Switch Pressed |
O.L. |
O.L. |