Connecting Rod, Engine
Connecting RodConnecting Rod Bore Diameter - Bearing End 56.505-56.525 mm (2.224-2.225 in)
Connecting Rod Bore Out-of-Round - Bearing End - Production 0.004-0.008 mm (0.00015-0.0003 in)
Connecting Rod Bore Out-of-Round - Bearing End - Service 0.004-0.008 mm (0.00015-0.0003 in)
Connecting Rod Side Clearance 0.11-0.51 mm (0.00433-0.02 in)
Rod Caps
First pass 20 Nm (15 lb ft)
Final pass 85 degrees
DO NOT re-use connecting rod fasteners