LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> Memory Seat Feature Inoperative >> Component Testing >> Memory Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Memory Switch

  1. Disconnect the harness connector at the memory seat adjuster switch.
  2. Test for infinite resistance between the signal terminal 1 and the 12 V reference terminal 2.
    • If not the specified value, replace the memory seat adjuster switch.
  3. Test the resistance between terminal 1 and terminal 2 while pressing the memory 1, memory 2, and EXIT buttons. Compare the resistance readings to the values in the Memory Switch Values table below.
    • If the resistance is not within the specified range, replace the memory seat adjuster switch.
Memory Switch Values

Switch Position Resistance
Idle Infinite
Memory 1 2.03K-2.49K Ω
Memory 2 3.83K-4.69K Ω
EXIT 8.33K-10.18K Ω
scientia non olet · About LEMON Manuals