LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Camaro V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Service and Repair




Crankshaft Position Sensor Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Disconnect the crankshaft position (CKP) electrical connector (3).




3. Remove the crankshaft sensor bolt.
4. Remove the crankshaft sensor.

Installation Procedure




1. Install the crankshaft position sensor.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the crankshaft position sensor bolt and tighten to 10 Nm (89 lb in).




3. Connect the CKP electrical connector (3).
4. Lower the vehicle.

scientia non olet · About LEMON Manuals