LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Body Control Module Programming and Setup >> Programming the BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the BCM

NOTE:

The vehicle will not start and many other functions may not operate correctly if a replacement BCM is not correctly set up. The following procedures must be followed:

  1. The BCM reprogramming - Refer to Service Programming System (SPS) .
  2. Brake pedal position sensor (BPPS) learn.
  3. Program SDM primary key to BCM
NOTE:

After the procedure is completed, the personalization settings of the BCM are set to default settings. Inform the customer that the personalization must be set again.

scientia non olet · About LEMON Manuals