LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Heat Shield To Starter Motor Retaining Bolts
    GM1951065Courtesy of GENERAL MOTORS CORP.
  1. Install the heat shield (2) to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the heat shield to starter motor retaining bolts (1) and tighten to 30 N.m (22 lb ft).
  3. Install the right catalytic converter to the vehicle. Refer to Catalytic Converter Replacement - Right Side .
  4. Connect the battery ground cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (Primary) , Battery Negative Cable Disconnection and Connection (Auxiliary) .
scientia non olet · About LEMON Manuals