LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Data Communications System >> Repair Instructions >> Data Link Resistor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Identifying Data Link Resistor
    GM2088410Courtesy of GENERAL MOTORS CORP.
  1. Connect the data link resistor (1) to the instrument panel harness.
  2. Tape the data link resistor (1) to the instrument panel harness.
  3. Install the instrument panel extension trim panel. Refer to Instrument Panel Lower Extension Side Trim Panel Replacement - Right Side .
  4. Install the front floor console side cover. Refer to Front Floor Console Side Cover Replacement - Right Side (9C3) , Front Floor Console Side Cover Replacement - Right Side (9C1) .
  5. Install the knee bolster. Refer to Knee Bolster Replacement .
scientia non olet · About LEMON Manuals