HVAC Control Module Replacement
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
If the HVAC control module needs to be replaced, the following procedures must be performed:
- Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
- Perform the SPS function Remote Heater and Air Conditioning Control Module - Programming and follow the on-screen instructions.
- Perform the SPS function Remote Heater and Air Conditioning Control Module - Setup and follow the on-screen instructions.
- Clear DTCs after completing the programming procedure.