Keyless Entry Control Module Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Keyless Entry Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the right instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side . Remove the front side door sill trim plate. Refer Front Side Door Sill Trim Plate Replacement .
1	Keyless Entry Control Module Procedure Disconnect the electrical connector. For programming and setup information refer to Control Module References .

Callout

Component Name

Preliminary Procedures

Remove the right instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
Remove the front side door sill trim plate. Refer Front Side Door Sill Trim Plate Replacement .

Keyless Entry Control Module

Procedure

Disconnect the electrical connector.
For programming and setup information refer to Control Module References .