LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Cutaway 4.8 A >> Repair and Diagnosis >> External Pages >> Different car >> Section 1775 (Keyless Entry System And Remote Functions) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 GMC Savana Special, 2010 GMC Savana Camper Special, 2010 GMC Savana, 2010 Chevrolet RV Cutaway, and 2010 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Electrical Connector At Door Lock Receiver
    GM871215Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) upper trim panel. Refer to Instrument Panel Upper Trim Pad Replacement .
  2. Disconnect the electrical connector (2) from the door lock receiver (1).
  3. Disengage the remote control door lock receiver (1) from the door lock receiver bracket.
  4. Remove the door lock receiver.
scientia non olet · About LEMON Manuals