Procedures

Steering Angle Sensor Centering

The steering angle sensor does not require centering often. Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows:

* Brake Pressure Modulator Valve Replacement
* Collision or other physical damage
* Electronic Brake Control Module (EBCM) programming or replacement
* Intermediate shaft replacement
* Steering angle sensor replacement
* Steering column replacement
* Steering gear replacement
* Vehicle Wheel Alignment

1. Center the steering wheel with the wheels facing forward.
2. With a scan tool, perform the special functions steering position sensor calibration and follow the on screen instructions.