Headlamp Control Module Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Headlamp Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the body control module. Refer to Body Control Module Replacement and mounting bracket.
1	Headlamp Control Module Nuts (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 6 N.m (53 lb in)
2	Headlamp Control Module Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set up procedures.

Callout

Component Name

Preliminary Procedure:
Remove the body control module. Refer to Body Control Module Replacement and mounting bracket.

Headlamp Control Module Nuts (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 6 N.m (53 lb in)

Headlamp Control Module

Procedure

Disconnect the electrical connectors.
Refer to Control Module References for programming and set up procedures.