Power Steering Control Module Scan Tool Information
Power Steering Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage | - | Varies | This displays battery voltage. |
| Calculated System Temperature | - | Varies | This is the calculated temperature of the power steering system. |
| Power Steering Control Module Center Procedure | - | Varies | The scan tool displays if the center procedure has been completed or not. |
| Power Steering Control Module SPS Calibration Status | - | Varies | The scan tool displays if the calibration status has been completed or not. |
| Steering Input Torque | - | Varies | This displays N.m. This is the calculated force of the steering shaft, as monitored by the power steering control module. |
| Steering Wheel Angle | - | Varies | This displays the steering wheel angle in degrees. |