Multimedia Player Interface Module Replacement

WARNING: This page is about a different car, the 2011 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Multimedia Player Interface Module, Front Floor Console Upper Trim And Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front floor console. Refer to Front Floor Console Replacement . Remove the front floor console armrest. Refer to Front Floor Console Armrest Replacement . Remove the console compartment power receptacle. Refer to Accessory Power Receptacle Replacement . Remove the USB receptacle. Refer to Audio Disc Player and USB Receptacle Replacement .
1	Front Floor Console Bolts (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2.5 N.m (22 lb in)
2	Front Floor Console Upper Trim
3	Multimedia Player Interface Module Procedure Slide the module upwards after disengaging retaining clips. Disconnect the electrical connectors.