Fastener Tightening Specifications

Application	Specifications
Application	Metric	English
Accelerator Pedal Position (APP) Sensor to Body Retaining Bolt	9 N.m	80 lb in
Air Cleaner Outlet Duct to Throttle Body Retaining Clamp	4 N.m	35 lb in
Air Cleaner Lower Housing to Body Retaining Bolt	10 N.m	89 lb in
Camshaft Position (CMP) Sensor to Engine Front Cover Retaining Bolt	9 N.m	80 lb in
Crankshaft Position (CKP) Sensor to Engine Block Retaining Bolt	25 N.m	18 lb ft
Engine Coolant Temperature (ECT) Sensor	20 N.m	15 lb ft
Evaporative Emission (EVAP) Canister to Underbody Retaining Bolt	6 N.m	53 lb in
Filler Tube Support Bracket to Body Retaining Bolt	9 N.m	80 lb in
Fuel Filler Pipe to Chassis Retaining Bolt	9 N.m	80 lb in
Fuel Pipe Stone Guard to Underbody Retaining Nut	5 N.m	44 lb in
Fuel Rail Ground Strap To Intake Manifold Retaining Bolt	10 N.m	89 lb in
Fuel Rail to Inlet Manifold Retaining Bolt	10 N.m	89 lb in
Fuel Tank Heat Shield	5.5 N.m	49 lb in
Fuel Tank Hose to Filler Tube Clamp	4 N.m	35 lb in
Fuel Tank Strap to Underbody Retaining Bolt	30 N.m	22 lb ft
Heated Oxygen Sensor (HO2S)	42 N.m	31 lb ft
Ignition Coil Bracket to Valve Rocker Arm Cover Retaining Blot	12 N.m	106 lb in
Ignition Coil to Ignition Bracket Assembly Retaining Bolt	12 N.m	106 lb in
Knock Sensor (KS) to Engine Block Retaining Bolt	20 N.m	15 lb ft
Mass Airflow Sensor with Intake Air Temperature (MAF) Sensor to Air Cleaner Outlet Duct Retaining Clamp	4 N.m	35 lb in
Rear Frame to Underbody Retaining Bolt
Final Pass	+ 120 Degrees
First Pass	65 N.m	48 lb ft
Spark Plug
Fit New Spark Plug	20 N.m	15 lb ft
Refit Existing Spark Plug	15 N.m	11 lb ft
Throttle Body to Intake Manifold Retaining Bolt	12 N.m	106 lb in