Fastener Tightening Specifications
WARNING: This page is about a different car, the 2011 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Dome Lamp to Body Retaining Screw | 2 N.m | 18 lb in |
| Emergency Vehicle Front Flashing Light to Bumper Bar Retaining Nut | 20 N.m | 15 lb ft |
| Fog Lamp to Front Bumper Fascia Retaining Screw | 2 N.m | 18 lb in |
| Front Fog Lamp to Front Fog lamp Bracket Retaining Bolt | 2 N.m | 18 lb in |
| Front Headlamp Levelling Sensor to Front Frame Retaining Bolt | 8 N.m | 71 lb in |
| Headlamp Bracket to Front End Module Carrier Assembly Retaining Bolt | 4 N.m | 35 lb in |
| Headlamp Dust Cap to Headlamp Retaining Screw | 1 N.m | 9 lb in |
| Headlamp Levelling Module to Coolant Reservoir Retaining Screw | 4 N.m | 35 lb in |
| Headlamp Repair Bracket to Headlamp Retaining Screw | 1 N.m | 9 lb in |
| Headlamp to Front End Module Carrier Assembly Retaining Bolt | 4 N.m | 35 lb in |
| Rear Headlamp Levelling Sensor to Rear Frame Retaining Bolt | 9 N.m | 80 lb in |
| Tail Lamp to Body Retaining Nut | 3 N.m | 44 lb in |