Circuit/System Verification
WARNING: This page is about a different car, the 2011 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
- Access the Service Programming System (SPS) and follow the on-screen instructions.
- On the SPS Supported Controllers screen, select IRC Audio System - 3. Configuration & Setup and follow the on-screen instructions.
- After completing the Configuration and Setup procedure, clear any DTCs and turn OFF the ignition.
- Ignition ON, verify DTC B1019 is not set as current.
- If DTC B1019 is retrieved as a current DTC, replace the radio.