Programming the BCM

WARNING: This page is about a different car, the 2011 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The vehicle will not start and many other functions may not operate correctly if a replacement BCM is not correctly set up. The following procedures must be followed:

The BCM reprogramming - Refer to Service Programming System (SPS) .
Brake pedal position sensor (BPPS) learn.
Program SDM primary key to BCM

NOTE:

After the procedure is completed, the personalization settings of the BCM are set to default settings. Inform the customer that the personalization must be set again.