LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Caprice 6.0 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Keyless Entry System And Remote Functions) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Retaining Tangs
    GM1962655Courtesy of GENERAL MOTORS CORP.
  1. Install the RFA by inserting the retaining tang (1) first and snap fitting the other two retaining tangs (2) listen for an audible click to confirm fitting.
    2. Fig 2: Identifying RFA Electrical Connector
    GM1962648Courtesy of GENERAL MOTORS CORP.
  2. Connect the RFA (1) electrical connector (2).
  3. Install the rear window shelf. Refer to Rear Window Shelf Trim Panel Replacement (Sedan) .
  4. Program the remote control door lock receiver (1). Refer to Control Module References .
  5. Operate the keyless entry for correct operation.
scientia non olet · About LEMON Manuals