LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Caprice 6.0 2 >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Boot Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Tie Rod & End Lock Nut
    GM1957103Courtesy of GENERAL MOTORS COMPANY
  1. Install the boot (2) to the inner tie rod (3).
  2. Install the NEW inner boot clamp (1).
  3. Crimp the inner boot clamp with the J-22610  Pliers or equivalent.
  4. Install the NEW outer boot retaining clamp (4).
    5. NOTE:

    Install the inner tie rod nut (5) with the same number of turns as recorded during removal.

  5. Install the inner tie rod nut (5) to the inner tie rod.
  6. Install the outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
scientia non olet · About LEMON Manuals