Installation Procedure

Fig 1: Fuel Pump Flow Control Module Bolts

Courtesy of GENERAL MOTORS COMPANY

Install the fuel pump flow control module (2) to the vehicle.
Slide the fuel pump flow control module towards the passenger side of the vehicle.

CAUTION:

Install the fuel pump flow control module bolts (1).
Tighten

Tighten the bolts to 10 N.m (89 lb in).

Fig 2: Body Wiring Harness Electrical Connector

Courtesy of GENERAL MOTORS COMPANY

Connect the body wiring harness electrical connector (1) to the fuel pump flow control module.

Fig 3: Spare Tire Spacer

Courtesy of GENERAL MOTORS COMPANY

Install the rear compartment floor stowage compartment. Refer to Rear Compartment Floor Stowage Compartment Replacement .
Install the spare tire spacer (1).
Close the rear compartment floor stowage compartment cover.
Program the fuel pump flow control module. Refer to Control Module References .