LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Captiva Sport LS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement (AWD) , Fuel Tank Replacement (FWD) .
    2. WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

  2. Disconnect the crossover tube from the secondary fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Secondary .
    3. Fig 1: Fuel & Evaporative Emission Lines, & Electrical Connectors
    GM2239702Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the electrical connectors (1).
  4. Disconnect the fuel and evaporative emission lines (2). Refer to Plastic Collar Quick Connect Fitting Service .
    5. Fig 2: Cam Lock Ring
    GM2239717Courtesy of GENERAL MOTORS COMPANY
  5. Using the J-45722  wrench , remove the cam lock ring (1) by turning counterclockwise.
    6. Fig 3: Primary Fuel Tank Module & O-Ring
    GM2239724Courtesy of GENERAL MOTORS COMPANY
  6. Remove the primary fuel tank module (1) and the O-ring (2).
  7. If replacing the fuel pump module only, remove the primary fuel level sensor. Refer to Primary Fuel Level Sensor Replacement .
scientia non olet · About LEMON Manuals