LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> Engine Performance >> System >> Data Communications System >> Repair Instructions >> Body Control Module Replacement >> Body Control Module Programming and Setup >> Programming the BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the BCM

NOTE:

The vehicle will not start and many other functions may not operate properly if a replacement BCM is not properly set up. The following procedures must be followed:

  1. Programming the BCM
  2. Brake Pedal Position Sensor Calibration. Refer to Brake Pedal Position Sensor Calibration .
  3. Learning the restraints ID
NOTE:

After the procedure is completed, the personalization settings of the BCM are set to default settings. Inform the customer that the personalization must be set again.

Refer to Service Programming System (SPS) for more information.

scientia non olet · About LEMON Manuals