LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
    3. Fig 1: Front Compartment Fuse Block, Wiring Harness Supply And Fuse Block Bolt
    GM2191906Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Bolts (1) are encapsulated on the end of threads so that they can not be removed from the fuse block. The fuse block must be pulled out to expose the positive cable lug.

  3. Remove the 3 front compartment fuse block bolts (1).
  4. Unlock retaining tabs and remove the front compartment fuse block (3).
  5. Remove the front compartment fuse block wiring harness supply (2).
scientia non olet · About LEMON Manuals