Circuit/System Testing
- Ignition OFF, disconnect the navigation antenna coax cable from the A11 radio.
- Ignition ON, test for 4.5-5.5 V between the coax cable connection center conductor at the radio and ground.
- If not within the specified range, replace the radio.
- Ignition OFF, reconnect the navigation antenna coax cable at the A11 radio.
- Disconnect the antenna coax cable from the T4M navigation antenna.
- Ignition ON, test for 4.5-5.5 V between the coax cable center conductor and the outer shield.
- If not within the specified range, replace the coax cable.
- If all circuits test normal, replace the T4M navigation antenna.