LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Suburban K2500 >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Boot Replacement (HP2) >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
  2. Remove the steering linkage inner tie rod nut from the steering linkage inner tie rod.
    3. Fig 1: View Of Inner Tie Rod, Boot & Clip
    GM461496Courtesy of GENERAL MOTORS COMPANY
  3. Remove the outer boot clamp (2) from the steering gear boot (3).
  4. Remove the inner boot clamp from the steering gear boot.
  5. Remove the steering gear boot from the steering gear (5).
scientia non olet · About LEMON Manuals