LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> DTC B1001: Option Configuration Error (Passenger Presence System) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

When removing connectors inspect for damage or corrosion. Damage or corrosion in the following requires repair or replacement of the affected.

  • Passenger Presence Module
  • Passenger Presence Module wiring harness
  1. Verify the correct K85 Passenger Presence Module part number has been installed
    • If the K85 Passenger Presence Module installed has an incorrect part number, replace the K85 Passenger Presence Module 
    • If the K85 Passenger Presence Module installed has a correct part number 
  2. Verify that DTC B1001 is not set as current in the K85 Passenger Presence Module.
    • If DTC is set as current, . If Inflatable Restraint Sensing and Diagnostic Module part number is correct  
    1. Verify the Inflatable Restraint Sensing and Diagnostic Module part number is correct.
      • If the K36 Inflatable Restraint Sensing and Diagnostic Module part number is incorrect, replace the K36 Inflatable Restraint Sensing and Diagnostic Module
      • If the K36 Inflatable Restraint Sensing and Diagnostic Module part number is correct
    2. Replace the K85 Passenger Presence Module
    • If the DTC is no set as current 
  3. All OK.
scientia non olet · About LEMON Manuals