Audio System Transceiver Module Replacement (U42)

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Audio System Transceiver Module (U42)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the video display assembly. Refer to Video Display Replacement (U42) or Video Display Replacement (U42/C3U) .
1	Roof Console Assembly Refer to Roof Rear Console Replacement (with RPO C3U) or Roof Rear Console Replacement (without RPO C3U) .
2	Audio System Transceiver Module Assembly Procedure Disconnect the electrical connector. Use a flat bladed tool to release the tabs that secure the module to the roof console on each side of the module. Slide forward and up to release from the roof console.

Callout

Component Name

Preliminary Procedure
Remove the video display assembly. Refer to Video Display Replacement (U42) or Video Display Replacement (U42/C3U) .

Roof Console Assembly
Refer to Roof Rear Console Replacement (with RPO C3U) or Roof Rear Console Replacement (without RPO C3U) .

Audio System Transceiver Module Assembly

Procedure

Disconnect the electrical connector.
Use a flat bladed tool to release the tabs that secure the module to the roof console on each side of the module.
Slide forward and up to release from the roof console.