LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Programming And Setup - All Systems) >> Repair Instructions >> Liftgate Control Module Programming and Setup >> Liftgate Calibration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Calibration

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

If any portion of the power liftgate assembly is replaced, repaired or disassembled, perform the following liftgate calibration procedure:

  1. Ensure that the rotary switch on the overhead console is set to Enable.
  2. On the scan tool, select Body, select Liftgate Module, select Module Setup
  3. Perform the scan tool LGM Open/Close Test
scientia non olet · About LEMON Manuals