LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Liftgate Interior Release Open/Close Switch Malfunction - DTC B396C or B396D >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the I/P multifunction switch.
  2. Test for infinite resistance between the signal terminal 7 and the ground terminal 3 with the liftgate open switch in the inactive position.
    • If not the specified value, replace the I/P multifunction switch.
  3. Test for less than 3 Ω between the signal terminal 7 and the ground terminal 3 with the liftgate open switch in the active position.
    • If greater than the specified range, replace the I/P multifunction switch.
  4. Test for infinite resistance between the signal terminal 8 and the ground terminal 3 with the liftgate disable switch in the inactive position.
    • If not the specified value, replace the I/P multifunction switch.
  5. Test for less than 3 Ω between the signal terminal 8 and the ground terminal 3 with the switch in the disable position
    • If greater than the specified range, replace the I/P multifunction switch.
scientia non olet · About LEMON Manuals