Removal Procedure

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the propeller shaft assembly. Refer to Propeller Shaft Replacement .

Fig 1: Torque Tube Mounting Bolt

Courtesy of GENERAL MOTORS COMPANY

Remove the torque tube mounting bolt.

Fig 2: Torque Tube

Courtesy of GENERAL MOTORS COMPANY

NOTE:

DO NOT allow the torque tube to hang, support with a suit stand.

Lower the torque tube to gain access to the clutch control module.

Fig 3: Clutch Control Module Electrical Connectors

Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors from the clutch control module.

Fig 4: Clutch Control Module Screws

Courtesy of GENERAL MOTORS COMPANY

Remove the screws for the clutch control module.
Remove the clutch control module from the torque tube.