Fastener Specifications
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Frame-to-Body Bolts | 100 N.m + 90 degrees | 74 lb ft + 90 degrees |
| Frame-to-Body Reinforcement Bolts | 45 N.m + 30 degrees | 33 lb ft + 30 degrees |
| Front Transmission Mount-to-Frame Bolt | 100 N.m | 74 lb ft |
| Front Wheelhouse Liner - Front Screws | 6 N.m | 53 lb in |
| Front Wheelhouse Liner Screws | 3 N.m | 27 lb in |
| Lower Ball Joint Fastener | 30 N.m + 120 degrees | 22 lb ft + 120 degrees |
| Rear Transmission Mount-to-Frame Bolt | 100 N.m | 74 lb ft |
| Rear Support to Body Bolts | 100 N.m + 90 degrees | 74 lb ft + 90 degrees |
| Rear Wheelhouse Panel Liner Nuts | 3 N.m | 27 lb in |
| Rear Wheelhouse Panel Liner Screws | 3 N.m | 27 lb in |
| Rear Reinforcements Arm Bolts | 58 N.m | 43 lb ft |
| Steering Gear Nut | 60 N.m + 120 degrees | 44 lb ft + 120 degrees |