LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Rear Bushing Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front And Rear Bushings
    GM1853577Courtesy of GENERAL MOTORS COMPANY
  1. Position the front and rear bushings so that they are equally in the control arm.
  2. Position the CH-48107  Bushing Remover and Installer on the front bushing.
  3. Using the vise, compress the front and rear bushings until they are seated.
  4. Remove the lower control arm from the vise.
  5. Remove the CH-48107  Bushing Remover and Installer from the front bushing.
  6. Install the lower control arm in the vehicle. Refer to Lower Control Arm Replacement .
scientia non olet · About LEMON Manuals