LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Programming And Setup - All Systems) >> Repair Instructions >> Front View Camera Module Programming and Setup >> Unsuccessful Programming Recovery
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

In the event of an interrupted or unsuccessful programming event, perform the following steps:

  1. Ignition ON. Ensure the K109 Frontview Camera Module, DLC and programming tool connections are secure and the SPS software is up to date.
  2. Verify the K109 Frontview Camera Module can be reprogrammed.
    • If the K109 Frontview Camera Module cannot be reprogrammed 
    1. Ignition OFF for 1 min, ignition ON.
    2. Verify the K109 Frontview Camera Module can be reprogrammed.
      • If the K109 Frontview Camera Module cannot be reprogrammed, replace the K109 Frontview Camera Module.
      • If the K109 Frontview Camera Module can be reprogrammed.
    3. All OK.
    • If the K109 Frontview Camera Module can be reprogrammed 
  3. All OK.
scientia non olet · About LEMON Manuals