Removal Procedure
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:
- Use forced air ventilation such as a fan set outside of the trunk.
- Plug or cap any fuel system openings in order to reduce fuel vapor formation.
- Clean up any spilled fuel immediately.
- Avoid sparks and any source of ignition.
- Use signs to alert others in the work area that fuel system work is in process.
- Remove the primary fuel tank module. Refer to Primary Fuel Tank Module Replacement (NT7, NU5) or Primary Fuel Tank Module Replacement (NA3, NE9, NF9) or Primary Fuel Tank Module Replacement (China) .
- Using two flat-bladed tools, carefully pull both locking tabs (1) outward while simultaneously lifting the level sensor.
- Using a small bladed tool, push in the electrical terminals (1) while simultaneously pulling out.