LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Power Seat System) >> Diagnostic Information and Procedures >> Memory Seat Feature Malfunction >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the S47D driver seat memory switch.
  2. Test for less than 15 Ω between the low reference circuit terminal 1 and ground.
    • If greater than the specified range, test the low reference circuit for an open/high resistance. If the circuit tests normal, replace the K40 seat memory control module.
  3. Ignition ON, press a power seat switch in order to wake up the K40 seat memory control module. Test for greater than 9 V between the signal circuit terminal 6 and ground.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K40 seat memory control module.
  4. Test for greater than 9 V between the signal circuit terminal 5 and ground.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K40 seat memory control module.
  5. If all circuits test normal, test or replace the S47D driver seat memory switch.
scientia non olet · About LEMON Manuals