Connecting Rod, Engine

First Pass 20 Nm (15 lb ft)
Final Pass 85 degrees

Connecting Rod Bearing Clearance-Production 0.023-0.065 mm (0.0009-0.0025 in)
Connecting Rod Bearing Clearance-Service 0.023-0.076 mm (0.0009-0.003 in)
Connecting Rod Bore Diameter-Bearing End 56.505-56.525 mm (2.224-2.225 in)
Connecting Rod Bore Out-of-Round-Bearing End-Production 0.004-0.008 mm (0.00015-0.0003 in)
Connecting Rod Bore Out-of-Round-Bearing End-Service 0.004-0.008 mm (0.00015-0.0003 in)
Connecting Rod Side Clearance 0.11-0.51 mm (0.00433-0.02 in)