LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Standard Trans, Trans Mfr CD 6L90M/MZ6 >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pressure Pipe/Hose Replacement (LS3, LS7) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Power Steering Pump & Power Steering Pressure Hose
    GM65356Courtesy of GENERAL MOTORS COMPANY
  1. Position the power steering pressure hose (2) to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Connect the power steering pressure hose (2) to the power steering gear and tighten the fitting to 34 N.m (25 lb ft).
  3. Connect the power steering pressure hose (2) to the power steering pump (1) and tighten the fitting to 34 N.m (25 lb ft).
  4. Install the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement (LS3, LS7) , Power Steering Pump Pulley Replacement (LS9) .
  5. Clean any excess power steering fluid from the vehicle and remove the drain pans.
  6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
scientia non olet · About LEMON Manuals