Body Control Module (BCM) Replacement
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The vehicle will not start and many other functions may not operate properly if a replacement body control module (BCM) is not properly set up. The following procedures must be performed in the following order:
- BCM Reprogramming-Refer to Body Control Module (BCM) Programming/RPO Configuration .
- Learning the restraints ID-Refer to Body Control Module (BCM) Programming/RPO Configuration .
- BPP Sensor calibration-Refer to Body Control Module (BCM) Programming/RPO Configuration .