K9 Body Control Module X4 Connector End Views

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: K9 Body Control Module X4 Connector End Views

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X4

Pin	Wire	Circuit	Function
1	1 YE	312	Right Headlamp Low Beam Control
2	1 YE	712	Left Headlamp Low Beam Control
3	0.5 D-GN/VT	1315	Right Front Turn Signal Lamp Control
4	0.5 D-BU/VT	1335	Right Rear Turn Signal Lamp Control
5	0.5 GY/BN	309	Right Park Lamp Control
6	0.5 VT/GY	709	Left Park Lamp Control
7	0.5 GY/YE	7542	Left Rear Stop Lamp Supply Voltage
8	-	-	Not Used
9	0.5 YE	7546	Logistics Relay Control
11	0.5 VT/WH	5065	Stop Lamp Relay Coil Control
12	0.5 VT/BK	3	Ignition Voltage
13	0.5 D-GN/YE	6846	Rear License Lamp Control
14	0.5 BN/GY	2268	Windshield Washer Relay Control
15	0.5 BN/VT	1594	Ignition 3 Relay Control
16	0.5 GY	91	Windshield Wiper Motor Relay Coil Control
17	0.5 BN/D-GN	196	Windshield Wiper Motor Park Switch Signal
18	0.5 WH/YE	5075	Current Sensor Signal
19	-	-	Not Used
20	0.5 RD/YE	40	Battery Positive Voltage
21	0.5 D-BU/VT	5076	Current Sensor Supply Voltage
22	0.5 VT/YE	5985	Accessory Wakeup Serial Data
21	0.5 WH/D-BU	5986	Serial Data Communication Enable
22-25	-	-	Not Used
26	1.5 BK	50	Ground

Connector Part Information

Harness: Body
OEM: 19151263
Service Connector: 19151263
Description: 26-Way F 0.64 2.8 Series (BK)

Terminal Part Information

Pins: Terminal Removal Tool T1 (0.5 - Pin 5-9, 11-18, 20-23, 26)
Terminated Lead: -
Release Tool: MKM-923-1A, 5A, 6A / J-38125-12A
Diagnostic Test Probe: J-35616-64B (L-BU)

Pins: Terminal Removal Tool T2 (0.5/1.0 - Pin 1-4)
Terminated Lead: -
Release Tool: MKM-923-1A, 5A, 6A / J-38125-12A
Diagnostic Test Probe: J-35616-35 (VT)