LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Fixed And MOVEABLE Windows System) >> Diagnostic Information and Procedures >> Power Windows Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, command the driver window and passenger window to go UP, DOWN, express UP and express DOWN with a scan tool. Each window should perform the UP, DOWN, express UP and express DOWN commands.
  2. Command the driver window to go UP, DOWN, express UP and express DOWN by using the S79D window switch-driver. The driver window should perform the UP, DOWN, express UP and express DOWN commands.
  3. Observe the scan tool Left Rear Main Control Down Switch, Left Rear Main Control Express Switch, Left Rear Main Control Up Switch, Right Rear Main Control Down Switch, Right Rear Main Control Express Switch, Right Rear Main Control Up Switch, Front Passenger Main Control Down Switch, Front Passenger Main Control Express Switch, and the Front Passenger Main Control Up Switch parameters while using the appropriate switches on the S79D window switch-driver. Each value should change from Inactive to Active as the Switch is used
  4. Observe the scan tool Passenger Window Switch at Door parameter while using the S79P window switch passenger, the values should change from Inactive to Up, Express Up, Down, and Express Down as the switch is used.
  5. Command the right rear window to go UP and DOWN by using the S79RR window switch-right rear, the right rear window should perform the UP and DOWN function.
  6. Command the left rear window to go UP and DOWN by using the S79LR window switch-left rear, the left rear window should perform the UP and DOWN function.