Relay Test
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector X5 at the K9 Body Control Module.
- Test for 60-200 Ω between control circuit terminal 14 X4 at the K9 Body Control Module and ground.
- If the value is not within the specified range, test the control circuit for a short to ground, short to voltage or an open.
- If all circuits test normal, test or replace the X50A Fuse Block - Underhood.